Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
ROA % is calculated as Net Income divided by its average Total Assets over a certain period of time. Gallant Precision Machining Co's annualizedNet Income for the quarter that ended in Dec. 2025 was NT$400 Mil.
Gallant Precision Machining Co's average Total Assets over the quarter that ended in Dec. 2025 was NT$15,558 Mil. Therefore, Gallant Precision Machining Co's annualized ROA % for the quarter that ended in Dec. 2025 was 2.57%.
The historical rank and industry rank for Gallant Precision Machining Co's ROA % or its related term are showing as below:
ROCO:5443'
s ROA % Range Over the Past 10 Years
Min: 2.38 Med: 3.52 Max: 5.81
Current: 3.02
During the past 13 years, Gallant Precision Machining Co's highest ROA % was 5.81%. The lowest was 2.38%. And the median was 3.52%.
ROCO:5443's ROA % is ranked better than 53.11% of 1028
companies
in the Semiconductors industry
Industry Median: 2.465
vs ROCO:5443: 3.02
Gallant Precision Machining Co (ROCO:5443) ROA % Explanation
ROA % measures the rate of return on the total assets (shareholder equity plus liabilities). It measures a firm's efficiency at generating profits from shareholders' equity plus its liabilities. ROA % shows how well a company uses what it has to generate earnings. ROA %s can vary drastically across industries. Therefore, ROA % should not be used to compare companies in different industries. For retailers, a ROA % of higher than 5% is expected. For example, Wal-Mart (WMT) has a ROA % of about 8% as of 2012. For banks, ROA % is close to their interest spread. A banks ROA % is typically well under 2%.
Similar to ROE, ROA % is affected by profit margins and asset turnover. This can be seen from the Du Pont Formula:
Note:
The Net Income data used here is four times the quarterly (Dec. 2025) net income data. The Revenue data used here is four times the quarterly (Dec. 2025) revenue data.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
Like ROE, ROA % is calculated with only 12 months data. Fluctuations in the company's earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective. ROA % can be affected by events such as stock buyback or issuance, and by goodwill, a company's tax rate and its interest payment. ROA % may not reflect the true earning power of the assets. A more accurate measurement is ROC % (ROC).
Many analysts argue the higher return the better. Buffett states that really high ROA % may indicate vulnerability in the durability of the competitive advantage.
E.g. Raising $43b to take on KO is impossible, but $1.7b to take on Moody's is. Although Moody's ROA % and underlying economics is far superior to Coca Cola, the durability is far weaker because of lower entry cost.
Gallant Precision Machining Co ROA % Related Terms
Gallant Precision Machining Co ROA % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Semiconductor Equipment & Materials subindustry, Gallant Precision Machining Co's ROA %, along with its competitors' market caps and ROA % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Gallant Precision Machining Co ROA % vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Gallant Precision Machining Co's ROA % distribution charts can be found below:
* The bar in red indicates where Gallant Precision Machining Co's ROA % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual ROA %, the net income of the last fiscal year and the average total assets over the fiscal year are used. In calculating the quarterly data,
the Net Income data used here is four times the quarterly (Dec. 2025) net income data.
ROA % is displayed in the 30-year financial page.
Gallant Precision Machining Co (ROCO:5443) has a ROA % of 2.57% as of Dec. 2025. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Gallant Precision Machining Co and its competitors. This is 27% below median its historical median of 3.52. Over the past decade, Gallant Precision Machining Co's ROA % has ranged from 2.38 to 5.81. According to the industry distribution chart, Gallant Precision Machining Co ranks #482 out of 1028 companies in the Semiconductors industry, placing it in the top 46.9%.
Is Gallant Precision Machining Co's ROA % too high?
Gallant Precision Machining Co's current ROA % of 2.57% is 27% below median its 10-year median of 3.52. Over the past 10 years, this metric has ranged from a low of 2.38 to a high of 5.81. The Semiconductors industry median ROA % is 2.47. Gallant Precision Machining Co's value of 2.57% is 4.3% above this industry median. Based on the distribution chart, Gallant Precision Machining Co ranks #482 out of 1028 companies in the Semiconductors industry, which is above the industry midpoint. Overall, Gallant Precision Machining Co has a GF Score™ of 61/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Gallant Precision Machining Co's ROA % compare to AMAT and LRCX?
According to the Semiconductors industry distribution chart, Gallant Precision Machining Co ranks #482 out of 1028 companies for ROA %. This puts Gallant Precision Machining Co in the upper half of its industry. The industry median ROA % is 2.47. Gallant Precision Machining Co's value of 2.57% is 4.3% above this benchmark. Historically, Gallant Precision Machining Co's own ROA % has ranged from 2.38 to 5.81 over the past decade. While the company's 10-year median is 3.52 vs. the industry median of 2.47, Gallant Precision Machining Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good ROA % for a Semiconductors company?
The median ROA % among Semiconductors companies is 2.47, based on 1,028 companies in the industry. Companies in the top quartile (top 25%) have a ROA % significantly above this median, while those in the bottom quartile fall well below. However, ROA % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Gallant Precision Machining Co's current ROA % of 2.57% is 4.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high ROA % mean?
A high ROA % can signal that a stock is expensive relative to its fundamentals. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Gallant Precision Machining Co and its competitors. For the Semiconductors industry, the median ROA % is 2.47 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Gallant Precision Machining Co's current ROA % is 2.57%, which is 27% below median its own 10-year median of 3.52. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Gallant Precision Machining Co stock overvalued right now?
Based on GuruFocus' analysis, Gallant Precision Machining Co (ROCO:5443) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$83.54, compared to a current price of NT$108.00 — trading 29.3% above its estimated fair value. The current ROA % is 2.57%, which is 27% below median its 10-year median of 3.52 and 4.3% above the Semiconductors industry median of 2.47. Gallant Precision Machining Co's overall GF Score™ is 61/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is ROA % calculated?
ROA % is calculated from a company's financial statements. For Gallant Precision Machining Co (ROCO:5443), the current ROA % is 2.57% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Gallant Precision Machining Co (ROCO:5443) Overvalued in 2026?
Based on GuruFocus' analysis, Gallant Precision Machining Co stock appears to be overvalued.
The current stock price of NT$108.00 is trading 29.3% above its estimated GF Value™ of NT$83.54.
GuruFocus considers Gallant Precision Machining Co to be Modestly Overvalued.
Key valuation signals for ROCO:5443:
ROA %: 2.57% (27% below median its 10-year median of 3.52)
GF Value™: NT$83.54 vs. price of NT$108.00 (29.3% above fair value)
Industry Position: 4.3% above the Semiconductors median (#482 of 1028)
No single metric tells the full story. See the ROCO:5443 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Gallant Precision Machining Co Business Description
Gallant Precision Machining Co Ltd is engaged in the design, manufacture, and sale of molds and machinery, metal parts and mold parts, stamping parts and die-cast parts, and automated manufacturing systems and their unit equipment. Geographically, it derives a majority of its revenue from Taiwan. The firm generates revenue from the sale of Display process equipment, Semiconductor process equipment, and Intelligent automated transportation equipment.
61GF Score
Get the complete analysis for ROCO:5443
ROA % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:5443 has been successfully added to your 
