Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Gallant Precision Machining Co's PEG Ratio or its related term are showing as below:
ROCO:5443'
s PEG Ratio Range Over the Past 10 Years
Min: 0.35 Med: 3.21 Max: 437.8
Current: 2.26
During the past 13 years, Gallant Precision Machining Co's highest PEG Ratio was 437.80. The lowest was 0.35. And the median was 3.21.
ROCO:5443's PEG Ratio is ranked better than 61.77% of 327
companies
in the Semiconductors industry
Industry Median: 3.53
vs ROCO:5443: 2.26
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Gallant Precision Machining Co (ROCO:5443) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Gallant Precision Machining Co PEG Ratio Related Terms
Gallant Precision Machining Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:5443 vs AMAT, LRCX, KLAC: PEG Ratio Comparison
For the Semiconductor Equipment & Materials subindustry, Gallant Precision Machining Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Gallant Precision Machining Co PEG Ratio vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Gallant Precision Machining Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Gallant Precision Machining Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Gallant Precision Machining Co (ROCO:5443) has a PEG Ratio of 2.26 as of Jul. 16, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Gallant Precision Machining Co and its competitors. This is 30% below median its historical median of 3.21. Over the past decade, Gallant Precision Machining Co's PEG Ratio has ranged from 0.35 to 437.80. According to the industry distribution chart, Gallant Precision Machining Co ranks #125 out of 327 companies in the Semiconductors industry, placing it in the top 38.2%.
Is Gallant Precision Machining Co's PEG Ratio too high?
Gallant Precision Machining Co's current PEG Ratio of 2.26 is 30% below median its 10-year median of 3.21. Over the past 10 years, this metric has ranged from a low of 0.35 to a high of 437.80. The Semiconductors industry median PEG Ratio is 3.53. Gallant Precision Machining Co's value of 2.26 is 36% below this industry median. Based on the distribution chart, Gallant Precision Machining Co ranks #125 out of 327 companies in the Semiconductors industry, which is above the industry midpoint. Overall, Gallant Precision Machining Co has a GF Score™ of 61/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Gallant Precision Machining Co's PEG Ratio compare to AMAT and LRCX?
According to the Semiconductors industry distribution chart, Gallant Precision Machining Co ranks #125 out of 327 companies for PEG Ratio. This puts Gallant Precision Machining Co in the upper half of its industry. The industry median PEG Ratio is 3.53. Gallant Precision Machining Co's value of 2.26 is 36% below this benchmark. Historically, Gallant Precision Machining Co's own PEG Ratio has ranged from 0.35 to 437.80 over the past decade. While the company's 10-year median is 3.21 vs. the industry median of 3.53, Gallant Precision Machining Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Semiconductors company?
The median PEG Ratio among Semiconductors companies is 3.53, based on 327 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Gallant Precision Machining Co's current PEG Ratio of 2.26 is 36% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Gallant Precision Machining Co and its competitors. For the Semiconductors industry, the median PEG Ratio is 3.53 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Gallant Precision Machining Co's current PEG Ratio is 2.26, which is 30% below median its own 10-year median of 3.21. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Gallant Precision Machining Co stock overvalued right now?
Based on GuruFocus' analysis, Gallant Precision Machining Co (ROCO:5443) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$83.54, compared to a current price of NT$108.00 — trading 29.3% above its estimated fair value. The current PEG Ratio is 2.26, which is 30% below median its 10-year median of 3.21 and 36% below the Semiconductors industry median of 3.53. Gallant Precision Machining Co's overall GF Score™ is 61/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Gallant Precision Machining Co (ROCO:5443), the current PEG Ratio is 2.26 as of Jul. 16, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Gallant Precision Machining Co (ROCO:5443) Overvalued in 2026?
Based on GuruFocus' analysis, Gallant Precision Machining Co stock appears to be overvalued.
The current stock price of NT$108.00 is trading 29.3% above its estimated GF Value™ of NT$83.54.
GuruFocus considers Gallant Precision Machining Co to be Modestly Overvalued.
Key valuation signals for ROCO:5443:
PEG Ratio: 2.26 (30% below median its 10-year median of 3.21)
GF Value™: NT$83.54 vs. price of NT$108.00 (29.3% above fair value)
Industry Position: 36% below the Semiconductors median (#125 of 327)
No single metric tells the full story. See the ROCO:5443 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Gallant Precision Machining Co Business Description
Gallant Precision Machining Co Ltd is engaged in the design, manufacture, and sale of molds and machinery, metal parts and mold parts, stamping parts and die-cast parts, and automated manufacturing systems and their unit equipment. Geographically, it derives a majority of its revenue from Taiwan. The firm generates revenue from the sale of Display process equipment, Semiconductor process equipment, and Intelligent automated transportation equipment.
61GF Score
Get the complete analysis for ROCO:5443
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:5443 has been successfully added to your 
