The historical rank and industry rank for Min Aik Precision Industrial Co's EV-to-FCF or its related term are showing as below:
TPE:4545'
s EV-to-FCF Range Over the Past 10 Years
Min: -69.07 Med: 4.79 Max: 13560.85
Current: -13.01
During the past 13 years, the highest EV-to-FCF of Min Aik Precision Industrial Co was 13560.85. The lowest was -69.07. And the median was 4.79.
TPE:4545's EV-to-FCF is ranked worse than 100% of 1727
companies
in the Industrial Products industry
Industry Median: 26.63
vs TPE:4545: -13.01
EV-to-FCF is a valuation multiple that allows analysts and investors to compare stocks, preferably in the same sector or industry. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
Min Aik Precision Industrial Co (TPE:4545) EV-to-FCF Explanation
EV-to-FCF is a valuation multiple that allows analysts and investors to compare stocks, preferably in the same sector or industry. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
Min Aik Precision Industrial Co's PE Ratio (TTM) for today is calculated as:
Min Aik Precision Industrial Co's share price for today is NT$38.20.
Min Aik Precision Industrial Co's Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Dec. 2025 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$0.180.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Enterprise Value is used because it is a more complete measure in reflecting how much an investor pays when buying a company. Free Cash Flow is an important financial metric because it represents the actual amount of cash at a company's disposal. Companies with a low EV-to-FCF ratio, combined with a strong balance sheet are generally considered as undervalued.
Min Aik Precision Industrial Co EV-to-FCF Related Terms
Min Aik Precision Industrial Co EV-to-FCF Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Metal Fabrication subindustry, Min Aik Precision Industrial Co's EV-to-FCF, along with its competitors' market caps and EV-to-FCF data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Min Aik Precision Industrial Co EV-to-FCF vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Min Aik Precision Industrial Co's EV-to-FCF distribution charts can be found below:
* The bar in red indicates where Min Aik Precision Industrial Co's EV-to-FCF falls into.
Min Aik Precision Industrial Co's current Enterprise Value is NT$2,905 Mil.
Min Aik Precision Industrial Co's Free Cash Flow for the trailing twelve months (TTM) ended in Dec. 2025 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$-223 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Min Aik Precision Industrial Co (TPE:4545) has a EV-to-FCF of -13.01 as of Jul. 05, 2026. EV to FCF ratio is the company's enterprise value divided by free cash flow. View historical data on Min Aik Precision Industrial Co and its competitors. According to the industry distribution chart, Min Aik Precision Industrial Co ranks #999999 out of 1727 companies in the Industrial Products industry.
Is Min Aik Precision Industrial Co's EV-to-FCF too high?
Min Aik Precision Industrial Co's current EV-to-FCF is -13.01. Based on the distribution chart, Min Aik Precision Industrial Co ranks #999999 out of 1727 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Min Aik Precision Industrial Co has a GF Score™ of 78/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Min Aik Precision Industrial Co's EV-to-FCF compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Min Aik Precision Industrial Co ranks #999999 out of 1727 companies for EV-to-FCF. This places Min Aik Precision Industrial Co in the lower half of its industry. The industry median EV-to-FCF is 26.63. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-FCF for an Industrial Products company?
The median EV-to-FCF among Industrial Products companies is 26.63, based on 1,727 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-FCF significantly above this median, while those in the bottom quartile fall well below. However, EV-to-FCF should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-FCF mean?
A high EV-to-FCF can signal that a stock is expensive relative to its fundamentals. EV to FCF ratio is the company's enterprise value divided by free cash flow. View historical data on Min Aik Precision Industrial Co and its competitors. For the Industrial Products industry, the median EV-to-FCF is 26.63 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Min Aik Precision Industrial Co's current EV-to-FCF is -13.01. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Min Aik Precision Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, Min Aik Precision Industrial Co (TPE:4545) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$34.31, compared to a current price of NT$38.20 — trading 11.3% above its estimated fair value. The current EV-to-FCF is -13.01. Min Aik Precision Industrial Co's overall GF Score™ is 78/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-FCF calculated?
EV-to-FCF is calculated from a company's financial statements. For Min Aik Precision Industrial Co (TPE:4545), the current EV-to-FCF is -13.01 as of Jul. 05, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Min Aik Precision Industrial Co (TPE:4545) Overvalued in 2026?
Based on GuruFocus' analysis, Min Aik Precision Industrial Co stock appears to be overvalued.
The current stock price of NT$38.20 is trading 11.3% above its estimated GF Value™ of NT$34.31.
GuruFocus considers Min Aik Precision Industrial Co to be Modestly Overvalued.
Key valuation signals for TPE:4545:
EV-to-FCF: -13.01
GF Value™: NT$34.31 vs. price of NT$38.20 (11.3% above fair value)
No single metric tells the full story. See the TPE:4545 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Min Aik Precision Industrial Co Business Description
Min Aik Precision Industrial Co Ltd is engaged in the processing and manufacturing of electroplating of aluminum and copper products, precision stamping components, and electroless nickel plating. It has three reportable segments: the Company, MAPP, and AMO. The company which generates key revenue, engages mainly in the development, design, and manufacture of precise components. MAPP engages mainly in the development and manufacture of medical plastic injection and molding. AMO engages mainly in the development, manufacture, and selling of automatic machines. Geographically, it derives a majority of its revenue from Singapore and Malaysia and the rest from China, Taiwan, Ireland, Thailand, and other countries.
78GF Score
Get the complete analysis for TPE:4545
EV-to-FCF is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4545 has been successfully added to your 
