Unisem (M) BhdXKLS:5005 -5.83%68 EBITDA Margin % is 12.64% as of Mar. 2026, which is 47% below its 10-year median of 23.92. GuruFocus rates XKLS:5005 with a GF Score™ of 68/100 and a GF Value™ of RM3.80 (Modestly Overvalued). The stock has 7 warning signs investors should review. Among 1,021 Semiconductors companies, Unisem (M) Bhd ranks better than 66.01% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Unisem (M) Bhd's EBITDA for the
three
months ended in Mar. 2026 was RM59 Mil. Unisem (M) Bhd's Revenue for the
three
months ended in Mar. 2026 was RM465 Mil. Therefore, Unisem (M) Bhd's EBITDA margin for the quarter that ended in Mar. 2026 was 12.64%.
Unisem (M) Bhd (XKLS:5005) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Unisem (M) Bhd EBITDA Margin % Related Terms
Unisem (M) Bhd EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Unisem (M) Bhd's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
XKLS:5005 vs NVDA, AVGO, MU: EBITDA Margin % Comparison
For the Semiconductors subindustry, Unisem (M) Bhd's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Unisem (M) Bhd EBITDA Margin % vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Unisem (M) Bhd's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Unisem (M) Bhd's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Unisem (M) Bhd (XKLS:5005) has a EBITDA Margin % of 12.64% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Unisem (M) Bhd and its competitors. This is 47% below median its historical median of 23.92. Over the past decade, Unisem (M) Bhd's EBITDA Margin % has ranged from 18.68 to 27.49. According to the industry distribution chart, Unisem (M) Bhd ranks #347 out of 1021 companies in the Semiconductors industry, placing it in the top 34%.
Is Unisem (M) Bhd's EBITDA Margin % too high?
Unisem (M) Bhd's current EBITDA Margin % of 12.64% is 47% below median its 10-year median of 23.92. Over the past 10 years, this metric has ranged from a low of 18.68 to a high of 27.49. The Semiconductors industry median EBITDA Margin % is 10.54. Unisem (M) Bhd's value of 12.64% is 19.9% above this industry median. Based on the distribution chart, Unisem (M) Bhd ranks #347 out of 1021 companies in the Semiconductors industry, which is above the industry midpoint. Overall, Unisem (M) Bhd has a GF Score™ of 68/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Unisem (M) Bhd's EBITDA Margin % compare to NVDA and AVGO?
According to the Semiconductors industry distribution chart, Unisem (M) Bhd ranks #347 out of 1021 companies for EBITDA Margin %. This puts Unisem (M) Bhd in the upper half of its industry. The industry median EBITDA Margin % is 10.54. Unisem (M) Bhd's value of 12.64% is 19.9% above this benchmark. Historically, Unisem (M) Bhd's own EBITDA Margin % has ranged from 18.68 to 27.49 over the past decade. While the company's 10-year median is 23.92 vs. the industry median of 10.54, Unisem (M) Bhd has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Semiconductors company?
The median EBITDA Margin % among Semiconductors companies is 10.54, based on 1,021 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Unisem (M) Bhd's current EBITDA Margin % of 12.64% is 19.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Unisem (M) Bhd and its competitors. For the Semiconductors industry, the median EBITDA Margin % is 10.54 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Unisem (M) Bhd's current EBITDA Margin % is 12.64%, which is 47% below median its own 10-year median of 23.92. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Unisem (M) Bhd stock overvalued right now?
Based on GuruFocus' analysis, Unisem (M) Bhd (XKLS:5005) is currently considered Modestly Overvalued. The stock's GF Value™ is RM3.80, compared to a current price of RM4.52 — trading 18.9% above its estimated fair value. The current EBITDA Margin % is 12.64%, which is 47% below median its 10-year median of 23.92 and 19.9% above the Semiconductors industry median of 10.54. Unisem (M) Bhd's overall GF Score™ is 68/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Unisem (M) Bhd (XKLS:5005), the current EBITDA Margin % is 12.64% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Unisem (M) Bhd (XKLS:5005) Overvalued in 2026?
Based on GuruFocus' analysis, Unisem (M) Bhd stock appears to be overvalued.
The current stock price of RM4.52 is trading 18.9% above its estimated GF Value™ of RM3.80.
GuruFocus considers Unisem (M) Bhd to be Modestly Overvalued.
Key valuation signals for XKLS:5005:
EBITDA Margin %: 12.64% (47% below median its 10-year median of 23.92)
GF Value™: RM3.80 vs. price of RM4.52 (18.9% above fair value)
Industry Position: 19.9% above the Semiconductors median (#347 of 1021)
No single metric tells the full story. See the XKLS:5005 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Unisem (M) Bhd is principally engaged in the manufacturing services of semiconductor devices in Malaysia. provides semiconductor assembly and test services to electronics companies. Its services include wafer bumping, wafer probing, wafer grinding, and a range of leadframe and substrate integrated circuit packaging, as well as wafer-level chip-scale packaging. It also offers RF, analog, digital, and mixed-signal test services. In addition, the company provides assembly, testing, failure analysis, and electrical and thermal characterization services. Geographically, its operations are located in Malaysia and the People's Republic of China.
68GF Score
Get the complete analysis for XKLS:5005
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XKLS:5005 has been successfully added to your 
